Thursday, August 27, 2015

Intex Avatar2 Tab Firmware & flash tool

Intex Avatar2 Tab Firmware & flash tool


Firmware upgrade procedure:
  • Connect charger with Tab & Tab with PC via USB cable.
  • Open Sherif roms installer.exe, application window
  • Select “FW Path” to update.img file.
  • Hold “volume up” (key) on tablet and Reset it via pin hole.
  • Windows will prompt you to install the device. Provide driver location path to USB driver > x86 / amd64 > Vista/Win7/Xp depending on OS of your PC.
  • After driver installation is finished, it will be shown as RK29 device inside My Computer > Manage > Devices.
  • Check 1st icon under Connected Devices, if it turns Green the device is ready to upgrade and driver has been installed properly, otherwise install USB driver again.
  • Keep holding Menu key till you see Green icon under connected devices. Then release the M key.
  • Click on “Upgrade” icon on bottom left side. Device upgrade will start, Green icon will turn to blinking Yellow.
  • Wait for the download process to finish "Success<1> Fail<0>".
  • Click "Exit" and disconnect USB cable.
  • Tab will Auto calibrate, press "OK"It will display Launcher after few minutes.











Posted by at

No comments:

Post a Comment

Note: Only a member of this blog may post a comment.

Subscribe to: Post Comments (Atom)