Android 4.3 XXUANA5 Jelly Bean Official Firmware Install Using Odin Guide How To Samsung Galaxy Grand 2 DUOS SM-G7102

Samsung has begun rolling out the Android 4.3 Jelly Bean Over-The-Air (OTA) update for Galaxy Grand 2 with dual SIM card slots also known as Galaxy Grand 2 DUOS (SM-G7102) in Southeast Asian countries.
Firmware details
PDA: G7102XXUANA5
CSC: G7102OLBANA1
MODEM: G7102DXUAML4
Version: Android 4.3
Build date: Jan 24, 2014
Regions: Indonesia, Malaysia, Philippines, Singapore, Thailand, Vietnam
Samsung Galaxy Grand 2 DUOS SM-G7102 users who missed the OTA update notification or unable to access the update over Samsung KIES, may follow our step-by-step guide to install the update manually.
Pre-requisites
1. Install USB Drivers for Samsung Galaxy Grand 2 on the computer.
2. Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. The Galaxy Grand 2 should be factory unlocked and not locked to any particular carrier.
5. Ensure the battery of the phone is charged more than 80 percent.
6. The Android 4.3 XXUANA5 Jelly Bean firmware is compatible only with the Galaxy Grand 2 DUOS (SM-G7102). Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy Grand 2 by navigating to Settings >> About Phone.
Files Required
1. Android 4.3 XXUANA5 Jelly Bean Firmware (Mirror Link)
2. Odin 3.07
Steps to Update Galaxy Grand 2 DUOS SM-G7102 with Android 4.3 XXUANA5 Jelly Bean Firmware
Step 1: Extract Firmware zip file using WinRAR/7-Zip/WinZip or any other extracting tool, you will get a .tar.md5 file and some other files (optional).
Step 2: Extract Odin zip file and you will get Odin3 v3.07.exe along with few other files.
Step 3: Switch off the Galaxy Grand 2.
Step 4: Boot the device into Download Mode by pressing and holding Volume Down, Home and Power buttons together until a construction Android robot icon with a warning triangle appears on screen. Now press the Volume Up button to enter Download Mode.
Step 5: Run Odin on the computer as an Administrator.
Step 6: Connect the Galaxy Grand 2 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn to light blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.
Note: If the Added message does not appear, then try re-install USB drivers or changing the port on the computer.

Step 7: Select the following files in Odin from extracted G7102XXUANA5 firmware folder:

• Click the PDA button and select the .tar.md5 file.
• Click the Phone button and select file with MODEM in its name. Ignore if there is no such file.
• Click the CSC button and select file with CSC in its name. Ignore if there is no such file.
• Click the PIT button and select the .pit file. Ignore if there is no such file.

Step 8: In Odin, enable Auto Reboot and F. Reset Time checkboxes. Also, ensure the Re-Partition checkbox is chosen only if a .pit file was chosen in the previous step.
Step 9: Verify everything suggested in Step 7 and Step 8 is done correctly. Then hit the Start button to begin the installation process.
Step 10: Once the installation process completes, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from the computer.
Related Article :How to Update Android 4.3 XXUAND1 Jelly Bean Official Firmware Samsung Galaxy Grand 2 DUOS SM-G7102 with Using Odin Guide.

Android 4.3 XXUANE2 Jelly Bean Official Firmware Using Odin Guide Samsung Galaxy Grand 2 DUOS SM-G7102
Samsung Galaxy Grand 2 DUOS SM-G7102 should be now updated with Android 4.3 XXUANA5 Jelly Bean official firmware. Head over to Settings >> About Phone to verify the software version running on the device.
Note: If Galaxy Grand 2 DUOS SM-G7102 stuck at booting animation after Step 10 then go to recovery mode (press and hold the Volume Up, Home and Power buttons together) and perform Wipe data/Factory Reset and Wipe Cache Partition task before selecting reboot system now function. In recovery mode use Volume keys to navigate between options and Power key to select the option. Please note, performing wiping task will erase your device internal memory data and not external SD card data.